Classic Stackable Battery
A classic stackable battery joins a reinforced base, identical white LiFePO4 blocks and a control unit with a square LCD, so the whole stack grows from 10.24 to 30.72 kWh whenever a household needs more stored energy.
Classic Stackable Battery Overview
A classic stackable battery is the most direct way to size storage to a real household load. The CLASSIC series sits on a reinforced base that keeps the stack stable and off the floor, and identical white battery blocks stack on top of it. Because every module adds 5.12 kWh, this classic stackable battery steps through 10.24, 15.36, 20.48, 25.6 and 30.72 kWh without a system swap. A control unit with a square LCD manages the whole stack from the top, so you can read state of charge, watch power flow and isolate a module safely. Above all, it is a modular home battery that starts small and expands on demand.
Technical Specifications
| Parameter | Value |
| Nominal Energy | 5 kWh / 10 kWh / 16 kWh (customizable) |
| Product Type | Stackable Lithium Battery |
| Cell Chemistry | LiFePO4 |
| Module Configuration | 16S1P |
| Nominal Capacity | 100 Ah / 200 Ah / 314 Ah |
| Nominal Voltage | 51.2 Vdc |
| Operating Voltage Range | 44.8 – 57.6 Vdc |
| Max. Continuous Charge Current | 50 A (5 kWh) / 100 A (10 kWh) / 150 A (16 kWh) |
| Max. Continuous Discharge Current | 100 A (5 kWh) / 200 A (10 kWh) / 300 A (16 kWh) |
| Cycle Life | ≥ 6,000 (5 kWh) / ≥ 8,000 (10 & 16 kWh) @ 25°C |
| Communication Interface | CAN / RS485 / RS232 |
| Display Panel | LCD (square display on control unit) |
| Ingress Protection | IP54 (optional) |
| Cooling Type | Natural air cooling |
| Parallel Expansion | Up to 64 units |
| Certifications | UL9540 & UL1973 |
| Warranty | > 5 years |
In practice, these figures describe the standard classic stackable battery, so the display, current rating and enclosure can all be re-specified for your market.
Stack Configurations
| Modules | Nominal Energy |
| 2 modules | 10.24 kWh |
| 3 modules | 15.36 kWh |
| 4 modules | 20.48 kWh |
| 5 modules | 25.6 kWh |
| 6 modules | 30.72 kWh |
Above all, the module count decides runtime, so a modular home battery can start small and grow with the load.
Frequently Asked Questions
How much energy can the classic stackable battery store?
Each module is 5.12 kWh, so a stack of two to six modules covers 10.24 kWh to 30.72 kWh. Single-unit configurations are also available at 5, 10 or 16 kWh nominal energy.
Can I extend the system after installation?
Yes. Capacity is added module by module, and up to 64 units can be paralleled where more power is needed alongside more energy.
What does the square LCD panel show?
The control unit carries a square LCD showing state of charge and operating status, so the battery’s condition can be read without opening the enclosure.
Which cells does it use?
Grade A LiFePO4 prismatic cells in a 16S1P configuration, sourced from EVE, CATL or GOTION, at 51.2 Vdc nominal.
Can it be installed in a garage or outdoors?
IP54 ingress protection is available as an option. That allows installation in a garage or a sheltered outdoor position rather than restricting it to a dry indoor room.




