Classic Wall-Mounted Battery

Reliable. Compact. Smart. - Energy Storage for Modern Homes.

5kWh · 10kWh · 16kWh    6,000 / 8,000 cycles by capacity

5-Year Warranty

WALL-MOUNTED / CLASSIC

Classic Wall-Mounted Battery

The classic wall-mounted battery is a pure-white cabinet that hangs flat against the wall, and it pairs a circular LCD with a soft blue accent ring with 5 to 16 kWh of LiFePO4 storage.

Classic Wall-Mounted Battery Overview

A classic wall-mounted battery solves the one problem every compact home shares, because floor space is never free. This slim white cabinet hangs on a steel bracket, so the room stays usable and the cells sit above the reach of children and pets. Its circular LCD with a blue accent ring reads out state of charge, voltage and status at a glance, whereas the recessed side handle makes lifting and servicing simple. Behind that clean face runs the same proven 51.2 V LiFePO4 core used across the RUIDASIMAI range. As a result, this wall-mounted lithium battery suits apartments, compact homes and any room where a floor cabinet would be in the way.

Technical Specifications

Parameter Value
Nominal Energy 5 kWh / 10 kWh / 16 kWh (customizable)
Product Type Wall-Mounted Lithium Battery
Cell Chemistry LiFePO4
Module Configuration 16S1P
Nominal Capacity 100 Ah / 200 Ah / 314 Ah
Nominal Voltage 51.2 Vdc
Operating Voltage Range 44.8 – 57.6 Vdc
Max. Continuous Charge Current 50 A (5 kWh) / 100 A (10 kWh) / 150 A (16 kWh)
Max. Continuous Discharge Current 100 A (5 kWh) / 200 A (10 kWh) / 300 A (16 kWh)
Cycle Life ≥ 6,000 (5 kWh) / ≥ 8,000 (10 & 16 kWh) @ 25°C
Communication Interface CAN / RS485 / RS232
Display Panel LCD (round display with status ring)
Ingress Protection IP54 (optional)
Cooling Type Natural air cooling
Parallel Expansion Up to 64 units
Certifications UL9540 & UL1973
Warranty > 5 years

In practice, these figures describe a standard wall-mounted lithium battery, so we can re-specify the enclosure, display and current rating for your market.

Frequently Asked Questions

How much floor space does it take up?

None. The enclosure is fixed to a wall, which suits garages and utility rooms where floor area is contested.

What does the display look like?

A round LCD with a status ring, so state of charge and operating state can be read at a glance.

What capacity options are available?

5 kWh, 10 kWh and 16 kWh nominal energy, with custom capacities available to order.

Can it be installed above a floor that occasionally gets wet?

The optional IP54 rating protects against dust ingress and splashing water, which is what allows installation in a garage or sheltered outdoor position.

How many can be installed together?

Up to 64 units in parallel, allowing both energy and power to be scaled.

Why Choose a Classic Wall-Mounted Battery?

Ten design decisions define this unit, and each one changes how a classic wall-mounted battery behaves in a real home. If you already know the floor-standing format, the difference lies in how little wall depth the cabinet needs and how quietly it runs.

  • Space-saving wall mount — hangs flat on the wall with a sturdy bracket; frees up floor space in apartments and small homes
  • Round LCD display with blue ring — clear SOC / voltage / status readout with a soft blue accent light
  • Integrated carry handle — recessed side handle and horizontal cooling vents in one clean profile
  • Grade A LiFePO4 cells — EVE / CATL / GOTION cells in a 16S1P configuration, 6,000–8,000 cycles @ 25°C
  • Smart BMS with 18-layer protection — over/under voltage, charge/discharge overcurrent, short circuit, low-temp charge / high-temp discharge protection, cell balancing, temperature monitoring and fault alarms
  • Up to 64 units in parallel — scale from 5 kWh to whole-home capacity
  • 99% inverter compatibility — pairs with virtually all hybrid inverter brands
  • UL9540 & UL1973 certified — IP54 (optional), natural air cooling, LCD status display
  • >5-year warranty with full-cycle service

The CLASSIC series is fully configurable at the factory. However, we work primarily as an OEM/ODM partner, so the specification starts with your market rather than with our catalogue. Therefore, tell us the target voltage, capacity and enclosure, and we build the classic wall-mounted battery around them.

  • Capacity & voltage — full-gradient capacity customization, non-standard voltages supported
  • Size & outline — any size to match your voltage/capacity; right-angle or arc-corner shapes; single/multi-layer stacking
  • Current rating — continuous and peak current customized on demand
  • Mounting structures — wall brackets, floor foot pads, lifting lugs, stacking buckles or slides
  • Heat dissipation — vertical side cooling ribs, louver vents, top fan openings or rear ventilation slots
  • Materials — cold-rolled steel, 304 stainless steel or aluminum alloy
  • Surface treatment — brushed, anodizing or full-color powder coating (custom RAL colors available)
  • Branding — custom logos, display layouts and panel designs
Built to Your Specification
Where a Classic Wall-Mounted Battery Fits

Because the cabinet hangs flat, one classic wall-mounted battery covers several household profiles. Typically, you will find it in five settings.

  • Apartments and compact homes
  • Entry halls, corridors and narrow storage rooms
  • Home workshops and garages
  • Homes with limited floor space
  • Grid-unstable rural households

Get in Touch Today

We are committed to delivering prompt, dependable, and professional services tailored to your needs.